Ключевые слова: accelerator magnets, SMES, HTS, REBCO, CORC cables, design, design parameters, bending process, bending radius, forced flow, cooling technology, mechanical properties
Yang J., Zhang X., Wu W., Jin L., Cheng Y., Yao Q., Sheng L., Ni D., Wu B., Mei E., Tong Y., Ou X., You W., Ren W.
Ключевые слова: accelerator magnets, ion irradiation, separator, prototype, design, design parameters, fabrication, test results, magnets dipole, coils, quench detection, cooling technology
Ключевые слова: Maglev system, HTS, YBCO, bulk, homogeneity, levitation performance, guidance, anisotropy, flux density, distribution, experimental results
Ключевые слова: HTS, YBCO, bulk, Maglev system, pinning, suspension, cooling technology, test results, displacements, levitation performance
Ключевые слова: HTS, bulk, stacked blocks, levitation performance, geometry effects, electromagnetic forces, guidance, modeling
Yang J., Wang X., Sun L., Chen Y., Yang W., Lu J., Wu W., Cheng Y., Yao Q., Zheng S., Sheng L., Zhu L., Yang T., Liang Y., Ni D., Wu B., Mei E., Tong Y., Ou X., You W.
Ключевые слова: accelerator magnets, ion irradiation, LTS, Nb3Sn, magnetic systems, NbTi, magnets dipole, multipole magnets, magnets sextupole, coils solenoidal, prototype, status
Noe M., Zhang Y., Grilli F., Liu Y., Qu R., Cheng Y., Doppelbauer M., Schreiner F., Ou J., Vargas-Llanos C.
Ключевые слова: rotating machines, HTS, REBCO, tapes, coils, ac losses, generators, stators, design, design parameters, modeling, numerical analysis, flux density, distribution, dissipative properties
Ключевые слова: wind farms application, generators, design, design parameters, HTS, YBCO, tapes, coils, stators, economic analysis, weight, geometry effects, torque
Ключевые слова: Maglev system, pinning, levitation performance, HTS, bulk, design parameters, dynamic operation, cryogenic systems, nitrogen liquid , modeling, numerical analysis
Ключевые слова: wind farms application, rotating machines, generators, inductance, HTS, YBCO, tapes, coils, fault currents, torque, ac losses, modeling, numerical analysis
Ключевые слова: rotating machines, HTS, YBCO, coated conductors, coils, generators, stators, winding configurations, review, design, design parameters, electromotive force, flux density, distribution, torque, armature
Ключевые слова: wave energy conversion, generators, HTS, YBCO, coated conductors, design, design parameters, status, new, winding configurations, comparison
Ключевые слова: quench detection, quench protection, prototype, test results
Ключевые слова: undulator, control systems, design, operational performance
Ключевые слова: HTS, current leads, heat exchanger, hydraulic performances, prototype, experimental results
Mitchell N., Chen Y., Devred A., Song Y., Huang X., Clayton N., Liu C., Gung C., Cheng Y., Ding K., Lu K., Shen G., Feng H., Yu X., Sato N., Niu E., Pierre B.
Ключевые слова: ITER, feeder, China, review, status, HTS, current leads, joints, thermal properties, shields
Li M., Zhang P., Zhang Z.C., Li W., Prestemon S., Cheng Y., Cui J., Schlueter R., Koettig T., Xu J.P., Ji X.K.
Ключевые слова: cryogenic systems, calorimetric method, meander, experimental results, undulator, heat loads
Mitchell N., Bi Y., Bauer P., Wang Z., Chen Y., Zhou T., Devred A., Song Y., Huang X., Gung C., Cheng Y., Ding K., Lu K., Shen G., Sahu A., Jong C., Dolgetta N., Ilin Y.
Ключевые слова: feeder, ITER, design, fabrication, termination, vacuum structure, cryostat
Ключевые слова: HTS, coated conductors, fabrication, buffer layers, substrate Ni-W, texture, films epitaxial, chemical solution deposition, precursors
Ключевые слова: HTS, coated conductors, fabrication, substrate Ni-W, texture, buffer layers, YBCO, chemical solution deposition, PLD process, microstructure
Sahu A.K., Bauer P., Bi Y., Chen Y., Cheng Y., Devred A., Ding K., Huang X., Liu S., Lu K., Mitchell N., Peng Y., Shen G., Song Y., Wang Z., Zhou T.
Ключевые слова: ITER, magnets, coils toroidal, LTS, NbTi, HTS, current leads, design, design parameters, feeder
Mitchell N., Bi Y., Bauer P., Wang Z., Chen Y., Zhou T., Devred A., Song Y., Huang X., Cheng Y., Ding K., Lu K., Shen G., Rodriguez-Mateos F., Sahu A.
Ключевые слова: ITER, magnets, design parameters, cryogenic systems, feeder
Bauer P., Bi Y., Cheng A., Cheng Y., Devred A., Ding K., Huang X., Liu C., Lin X., Mitchell N., Sahu A., Shen G., Song Y., Wang Z., Zhang H., Yu J., Zhou T.
Ключевые слова: HTS, current leads, ITER, Bi2223, tapes, test results, design parameters, current sharing, critical caracteristics, critical current, magnetic field dependence
Ключевые слова: HTS, Bi2223, tapes, current leads, ITER, coils toroidal, LTS, NbTi, joint resistances, joints, test results, feeder
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.